Dynamic Polarization Effects in Ion Channeling Through Single-Well Carbon Nanotubs

Ion channeling through a single-wall carbon nanotube is simulated by solving Newton’s equations for ion motion at intermediate energies, under the action of both the surface-atom repulsive forces and the polarization forces due to the dynamic perturbation of the nanotube electrons. The atomic repulsion is described by a continuum potential based on the Thomas-Fermi-Moliere model, whereas the dynamic polarization of the nanotube electrons is described by a two-dimensional hydrodynamic model, giving rise to the transverse dynamic image force and the longitudinal stopping force. In the absence of centrifugal forces, a balance between the image force and the atomic repulsion is found to give rise to ion trajectories which oscillate over peripheral radial regions in the nanotube, provided the ion impact position is not too close to the nanotube wall, the impact angle is sufficiently small, and the incident speed is not too high. Otherwise, the ion is found to oscillate between the nanotube walls, passing over a local maximum of the potential in the center of the nanotube, which results from the image interaction. The full statistical analysis of 103 ion trajectories has been made to further demonstrate the actual effect of dynamic polarization on the ion channeling

Estimation of soil and vegetation temperatures with multiangular thermal infrared observations: IMGRASS, HEIFE, and SGP 1997 experiments

The potential of directional observations in the thermal infrared region for land surface studies is a largely uncharted area of research. The availability of the dual-view Along Track Scanning Radiometer (ATSR) observations led to explore new opportunities in this direction. In the context of studies on heat transfer at heterogeneous land surfaces, multiangular thermal infrared (TIR) observations offer the opportunity of overcoming fundamental difficulties in modeling sparse canopies. Three case studies were performed on the estimation of the component temperatures of foliage and soil. The first one included the use of multi-temporal field measurements at view angles of 0°, 23° and 52°. The second and third one were done with directional ATSR observations at view angles of 0° and 53° only. The first one was a contribution to the Inner-Mongolia Grassland Atmosphere Surface Study (IMGRASS) experiment in China, the second to the Hei He International Field Experiment (HEIFE) in China and the third one to the Southern Great Plains 1997 (SGP 1997) experiment in Oklahoma, United States. The IMGRASS experiment provided useful insights on the applicability of a simple linear mixture model to the analysis of observed radiance. The HEIFE case study was focused on the large oasis of Zhang-Ye and led to useful estimates of soil and vegetation temperatures. The SGP 1997 contributed a better understanding of the impact of spatial heterogeneity on the accuracy of retrieved foliage and soil temperatures. Limitations in the approach due to varying radiative and boundary layer forcing and to the difference in spatial resolution between the forward and the nadir view are evaluated through a combination of modeling studies and analysis of field data

A tunable radiation source by coupling laser-plasma-generated electrons to a periodic structure

Near-infrared radiation around 1000 nm generated from the interaction of a high-density MeV electron beam, obtained by impinging an intense ultrashort laser pulse on a solid target, with a metal grating is observed experimentally. Theoretical modeling and particle-in-cell simulation suggest that the radiation is caused by the Smith-Purcell mechanism. The results here indicate that tunable terahertz radiation with tens GV=m field strength can be achieved by using appropriate grating parameter

Potential distribution in deformed ZnO nanowires

AbstractThe potential distribution in a deformed ZnO nanowire relies upon its piezoelectric and semiconductive properties. Here we systematically investigate the influence of different parameters on the equilibrium potential distribution. In particular we calculate the electric potential distribution when thermodynamic equilibrium among free charge carriers is achieved for nanowires under different doping concentrations (n or p type), different applied forces, and different geometric configurations. We show that doping concentration is the parameter that mostly affects the magnitude and distribution of the piezoelectric potential

Ion-beam-assisted fabrication and manipulation of metallic nanowires

Metallic nanowires (NWs) are the key performers for future micro/nanodevices. The controlled manoeuvring and integration of such nanoscale entities are essential requirements. Presented is a discussion of a fabrication approach that combines chemical etching and ion beam milling to fabricate metallic NWs. The shape modification of the metallic NWs using ion beam irradiation (bending towards the ion beam side) is investigated. The bending effect of the NWs is observed to be instantaneous and permanent. The ion beam-assisted shape manoeuvre of the metallic structures is studied in the light of ion-induced vacancy formation and reconfiguration of the damaged layers. The manipulation method can be used for fabricating structures of desired shapes and aligning structures at a large scale. The controlled bending method of the metallic NWs also provides an understanding of the strain formation process in nanoscale metals

Pulsed light beams in vacuum with superluminal and negative group velocities

Gouy's phase of transversally limited pulses can create a strong anomalous dispersion in vacuum leading to highly superluminal and negative group velocities. As a consequence, a focusing pulse can diverge beyond the focus before converging into it. A simple experiment is proposed.Comment: 4 pages, 5 figure

Normal-superconducting transition induced by high current densities in YBa2Cu3O7-d melt-textured samples and thin films: Similarities and differences

Current-voltage characteristics of top seeded melt-textured YBa2Cu3O7-d are presented. The samples were cut out of centimetric monoliths. Films characteristics were also measured on microbridges patterned on thin films grown by dc sputtering. For both types of samples, a quasi-discontinuity or quenching was observed for a current density J* several times the critical current density Jc. Though films and bulks much differ in their magnitude of both Jc and J*, a proposal is made as to a common intrinsic origin of the quenching phenomenon. The unique temperature dependence observed for the ratio J*/Jc, as well as the explanation of the pre-quenching regime in terms of a single dissipation model lend support to our proposal.Comment: 10 pages, 10 figures, submitted to Physical Review

Environmental life cycle assessment and techno-economic analysis of triboelectric nanogenerators

As the world economy grows and industrialization of the developing countries increases, the demand for energy continues to rise. Triboelectric nanogenerators (TENGs) have been touted as having great potential for low-carbon, non-fossil fuel energy generation. Mechanical energies from, amongst others, body motion, vibration, wind and waves are captured and converted by TENGs to harvest electricity, thereby minimizing global fossil fuel consumption. However, only by ascertaining performance efficiency along with low material and manufacturing costs as well as a favorable environmental profile in comparison with other energy harvesting technologies, can the true potential of TENGs be established. This paper presents a detailed techno-economic lifecycle assessment of two representative examples of TENG modules, one with a high performance efficiency (Module A) and the other with a lower efficiency (Module B) both fabricated using low-cost materials. The results are discussed across a number of sustainability metrics in the context of other energy harvesting technologies, notably photovoltaics. Module A possesses a better environmental profile, lower cost of production, lower CO2 emissions and shorter energy payback period (EPBP) compared to Module B. However, the environmental profile of Module B is slightly degraded due to the higher content of acrylic in its architecture and higher electrical energy consumption during fabrication. The end of life scenario of acrylic is environmentally viable given its recyclability and reuse potential and it does not generate toxic gases that are harmful to humans and the environment during combustion processes due to its stability during exposure to ultraviolet radiation. Despite the adoption of a less optimum laboratory manufacturing route, TENG modules generally have a better environmental profile than commercialized Si based and organic solar cells, but Module B has a slightly higher energy payback period than PV technology based on perovskite-structured methyl ammonium lead iodide. Overall, we recommend that future research into TENGs should focus on improving system performance, material optimization and more importantly improving their lifespan to realize their full potential

Imaging of metallic nano-particles using plasmon/valence energy loss electrons

Although crystal lattices can be determined reasonably well using high-resolution electron microscopy, determination of local chemistry at high spatial-resolution remains a challenge. An energy-filtering system has made it possible to perform chemically sensitive imaging in a transmission electron microscopy (TEM). This type of imaging usually relies on the signal of the inner shell ionization edge, the intensity of which is affected by the threshold energy-loss and the ionization cross-section of the edge. Therefore, the spatial resolution of a core loss image is strongly affected by the signal-to-noise ratio. In this respect, lower loss electrons from the plasmon or valence region of the energy loss spectrum (10--100 eV) are favorable for chemically sensitive imaging due to the much higher signal intensity, provided any delocalization effects are small in comparison to the required spatial resolution. Compositionally sensitive imaging using the aluminum plasmon energy-loss electrons has been shown to produce {approximately}2nm resolution for an atomically sharp Al/Ti interface. Using this resolution result the reason for the compositional contrast seen in an ion implanted specimen is postulated. The sputter deposited Al/Ti polycrystalline multilayer specimen was imaged using a JEOL 3010 TEM at 300 kV equipped with a Gatan Imaging Filter (GIF{trademark}). The implanted alumina sample was imaged with a GIF{trademark} interfaced to a Philips CM30 TEM operated at 300 keV. The low-loss images were gain normalized, 512 x 512 pixels in size and were recorded with an exposure time of 1 second and an energy-selecting window of 5 eV